Peel and stick vinyl floor tile, also known as the self-adhesive tile is an attractive and inexpensive flooring option. That can be completed over a weekend as a do-it-yourself key project. The successful installation of Stripping and gluing floors is making sure that you have the correct surface for application. No application surface is known as the subsoil and the ideal subfloor should be moisture proof. And, also free from the previous adhesives, oils, paints, and vinyl self-adhesive sealers. While can be installed on wood, vinyl, concrete, and laminate flooring, most owners choose it as an inexpensive way to cover damaged vinyl or linoleum. The following instructions will explain how to prepare existing vinyl or linoleum flooring for the installation of self-adhesive tiles.
Examine the existing floor for any damaged or embossed tile. If the floor is in good shape, with little or no damaged tiles, proceed with cleaning the floor with an appropriate liquid cleaner-separator. Remove any damaged or embossed tile with the knife. Following the manufacturer’s instructions, use the smooth edge trowel to apply the one-piece relief leveler. This patches the remaining gaps of the missing tiles and also softens the relief of the previous floor to create a smooth and seamless surface for the application of the new adhesive tile.
Allow the one-piece relief leveler to dry according to the manufacturer’s instructions. After the steamroller is dry, and the rough edges. Sweep and use a wet mop to clean the sanding dust. After allowing the floor to dry completely, you can install your peel and glue the vinyl tiles.
12 Preparation Before Peel And Stick Vinyl Floor Tile Photos